Important Don'ts for Test

• Don't Skip Familiarization
  Get acquainted with Druid's tracking system to optimize usage and gather valuable data. Find model-specific details here.

• Don't Test with a Low Battery
  Ensure the device battery is sufficiently charged. A low battery will prevent the device from working properly (due to working voltage thresholds) and affect test results.

• Don't Place Directly on Hot Surfaces
  Avoid placing the device directly on surfaces like concrete floor to prevent extreme heat. Use insulation materials like plastic foam.

• Don't Place Near Interference Sources
  Avoid placing the device near metal objects (like fences or window frames), liquid surfaces, balconies, high walls, electric or magnetic fields (such as transformers), or under a roof, as these can interfere with signals.

• Don't Test Inside Cars
  Do not place the device inside a car, especially near the front windshield, as this can cause extreme heat and signal interference.

• Don't Place Devices Too Close Together
  Keep devices at least 1 meter apart to prevent signal interference.

• Don't Bring Indoors
  Avoid bringing the device indoors during the test to prevent battery drain and test disruption. If necessary, turn the device off.