Changing Device Setting

1. In Ecotopia App, tap Device.
   App displays device list page.
2. In the device list, tap the device you need to change the setting.
   App displays device information page.
3. On the device information page, tap Setting.
   App displays device setting page.
4. Change the settings as needed.
   You can change the following settings:
   • Environment&GNSS Sync
     When enabled, the collection mode and collection interval of environmental data will be consistent with the GNSS data collection, and cannot be changed separately.
   • GNSS data collecting
     Available options are Interval, Follow transmission and Off.
   • Interval
     Set the collecting interval when GNSS data collecting is set to Interval.
   • Environment data collecting
     Available options are Interval, Follow transmission and Off. This field is not available when Environment & GNSS Sync is enabled.
   • Interval
     Set the collecting interval when Environment data collecting is set to Interval. This field is not available when Environment & GNSS Sync is enabled.
   • ODBA collecting
     Available options are Interval and Off.
   • Interval
     Set the collecting interval when ODBA collecting is set to Interval.
   • Cellular
     Available options are Interval, On-time and Combined.
     This setting doesn't apply to INTELINK device, Argos device and Iridium device.
5. Click Save after finish.

For devices with a cellular module, the changed settigns will take effect the next time the device communicates with the server. For devices that do not have a cellular module, the changed settings will take effect after the setting is delivered or the HUB associated with the device communicates with the server.